Processing flow of prefabricated steel structure warehouse

We all know that the raw materials of steel structures are very large, so how do the workers process the raw materials? Is it like the people in ancient times, smelting and making it little by little? Obviously this is impossible, and the workers in the factory will be miserable. Today’s steel structure processing plants have entered into intelligent and numerical control. Today we will talk about the Processing flow of prefabricated steel structure warehouse.

What are the Processing flow of prefabricated steel structure warehouse?

The machines in the steel structure processing plant are closely connected with the production process, and each production process is equipped with corresponding machinery and equipment. The usual process is divided into: blanking, assembly, welding, shot blasting, rust removal, painting and other series.

1.Material cutting

The blanking series is also called cutting blanking. In this process, there are:

1. Straight flame cutting machine, its function is to cut the whole plate into flange plates or webs, and it can also be used for cutting thick plate parts. The cutting width is 20cm-30cm, the cutting length is 0m-20m, and the appearance is relatively straight.
2. CNC flame cutting machine: mainly used for the cutting of cross-section webs, unusual parts and arcs, the cutting width is 10cm-300cm, and its cuttable length is slightly longer than that of the flame cutting machine. Among them, its arc radius is 1cm-9999cm,
3.  Fully automatic beveling machine, mainly used for the cutting of the web bevel of penetration welds and the bevel of parts
4. CNC band saw machine: mainly used for H steel and The cross-section cutting of box-shaped components is more accurate, with an error of about 1mm.

2.Automatic vertical group machine

In the erecting process, workers will use the automatic erecting machine. Its function is to ensure the positioning of the webs and wings of different widths within the specification range, and the synchronization is accurate. According to user requirements, it can be set to automatically Assemble, no need to adjust every time;

3.Manual welding and painting

After the large-scale components are completed, workers will use small welding machines to process and weld the steel structure parts. At this time, the process needs to be manually operated by workers. In addition, for rusted steel structures, workers will use shot blasting machines to automatically polish the steel. rust of the structure. After grinding, workers will use an automatic paint sprayer to paint the steel structure. Its function is to use high-pressure spray paint to evenly attach to the surface of the steel structure to make the steel structure more resistant to corrosion.

Note: The above are my personal opinions. There are many production equipments required for the Processing flow of prefabricated steel structure warehouse that have not been mentioned. In the process, the steel structure handling is carried out by means of crane beams.